NYViQ Spa Conditioner

NYViQ Spa Conditioner in a 1 litre bottle. A liquid water conditioner designed to help support soft, comfortable hot tub water alongside your usual sanitiser. Dose 100ml per 1,000 litres at fresh fill, then 50ml per 1,000 litres once weekly.

Designed to help support comfortable, pleasant-feeling spa water between water changes.
Simple routine: one fresh-fill dose, then one measured dose once a week.
Used alongside chlorine or bromine sanitiser; it does not replace it.
Liquid format that pours straight into the spa water with the pumps running.

Available formats

When you need it

At every fresh fill or start-up.
Once a week as part of your regular water-care routine.
When restocking conditioner from a NYViQ kit.

How to use

Find your spa's actual filled water volume in the manual or on the specification plate.
Fresh fill: measure 100ml per 1,000 litres of spa water.
Weekly: measure 50ml per 1,000 litres of spa water, once a week.
With the pumps running, pour the measured dose directly into the spa water.
Keep sanitiser, pH and alkalinity in range following each product's label.

Dosing guide

Fresh fill: 100ml per 1,000 litres. Once weekly: 50ml per 1,000 litres. Use your spa's actual filled water volume from the manual or specification plate, not the kit name. These doses apply to Spa Conditioner only; follow the product label for every other chemical.

For 500 L, add 50ml to reach Fresh fill.
For 500 L, add 25ml to reach Once weekly.
For 750 L, add 75ml to reach Fresh fill.
For 750 L, add 37.5ml to reach Once weekly.
For 1,000 L, add 100ml to reach Fresh fill.
For 1,000 L, add 50ml to reach Once weekly.
For 1,250 L, add 125ml to reach Fresh fill.
For 1,250 L, add 62.5ml to reach Once weekly.
For 1,500 L, add 150ml to reach Fresh fill.
For 1,500 L, add 75ml to reach Once weekly.
For 1,750 L, add 175ml to reach Fresh fill.
For 1,750 L, add 87.5ml to reach Once weekly.
For 2,000 L, add 200ml to reach Fresh fill.
For 2,000 L, add 100ml to reach Once weekly.

How it works

NYViQ Spa Conditioner is a liquid hot tub water conditioner supplied in a 1 litre bottle. It is not a sanitiser.

It is added directly to the spa water at a measured rate based on water volume: a higher dose at fresh fill, then a smaller maintenance dose once a week.

A consistent, volume-based routine makes conditioner use predictable. Correct sanitiser and water balance remain essential and are managed separately.

Frequently asked questions

Is NYViQ Spa Conditioner a sanitiser?

No. It is a water conditioner. You still need to maintain a sanitiser such as chlorine or bromine as your spa manufacturer recommends.

How much Spa Conditioner do I add at fresh fill?

100ml per 1,000 litres of spa water. For example 150ml for a 1,500 litre spa.

How much do I add each week?

50ml per 1,000 litres once weekly. For example 37.5ml for 750 litres or 62.5ml for 1,250 litres.

How do I add it?

Pour it directly into the spa water with the pumps running. Do not premix it with other chemicals.

What volume should I use for the calculation?

Your spa's actual filled water volume, from the manual or specification plate. Do not guess from seat count.

How long does 1 litre last?

It depends on your water volume. At 1,000 litres, 1L gives 20 weekly doses if used only for maintenance, or the 100ml fresh-fill dose plus 18 weekly doses.

Is there a heavy-use dose?

No separate heavy-use dose has been approved. Use the standard doses and follow your spa manufacturer's guidance for sanitising under heavy use.